Posts Tagged ‘CAD’

h1

Another FSM Design Tool

April 17, 2008

For those who don’t read through the comments. Harry the ASIC guy commented on the last post about an FSM design environment from Paul Zimmer. You can find more details here.

Advertisements
h1

Visual FSM Design Tool

April 9, 2008

I am still not convinced visual FSM design tools make such a big difference but this one looks pretty cool.
I haven’t really went through all the features and details, so if anyone has some more details/recommendations/complaints about it, just email me or simply comment on this post.

h1

The Principle Behind Multi-Vdd Designs

April 2, 2008

Multi-Vdd design is a sort of buzz word lately. There are still many issues involved before it could become a real accepted and supported design methodology, but I wanted to write a few words on the principle behind the multi-Vdd approach.

The basic idea is that by lowering the operating voltage of a logic gate we naturally also cut the power dissipation through the gate.
The price we pay is that gates operated by lower voltage are somewhat slower (exact factor is dependent on many factors).

The basic idea is to identify the non-critical paths and to power the gates in those paths with a lower voltage. Seen below are two paths, there is obviously less logic through the blue path than through the orange one and is therefore a candidate for being supplied with lower Vdd.

multivdd.png

The idea looks elegant but as always the devil is in the details. There are routing overheads for the different power grids, level shifters must be introduced when two different Vdd logic paths converge to create a new logical function, new power source for the new Vdd must be designed and most important of all, there has to be support present by the CAD tools – if that doesn’t exist this technique will be buried.